Heat pump installers in Rothes free & no obligation

Compare several free, no-obligation quotes from heat pump installers in and around Rothes.

3 heating engineers registered locally Free & no obligation Several quotes to compare
  • Free and no obligation
  • Quotes from installers who cover Rothes
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

Heat pump installers in Rothes

Get several quotes from local heat pump installers.

Compare at your own pace — free and with no obligation for homeowners.

Get a quick quote

  • Free and no obligation
  • Quotes from installers who cover Rothes
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

How to get your quotes

1

Describe your project

Fill in the form in a few clicks with the details of your job.

2

Receive your quotes

Local heat pump installers get in touch with their proposal.

3

Compare & choose

Compare prices, references and approach at your own pace.

4

Get the work started

You choose the firm freely — free and with no obligation.

🏠 Heat pump installers in Rothes, Moray

Rothes sits in Moray with a small community of around 1,230 people and a mix of traditional and modern homes. For many households here, replacing an old boiler with a heat pump needs attention to building fabric, outdoor unit siting and the local climate.

Use the form on this page to request free quotes from heating engineers experienced with air source, air-to-water and ground source systems; remember to ask each installer for their MCS certificate number.

🛠️ What heat pump installers in Rothes can do for you

Air source heat pumps

  • Typical installation cost, before any grant
  • Boiler Upgrade Scheme, England and Wales
  • Extra for oil or LPG homes off the gas grid (until March 2027)

Ground source heat pumps

  • Boiler Upgrade Scheme, England and Wales
  • Home Energy Scotland grant

Air-to-air heat pumps

  • Boiler Upgrade Scheme, England and Wales

Heat pump grants

  • Boiler Upgrade Scheme (England and Wales)
  • Home Energy Scotland grant + optional loan
  • VAT on installation until 31 March 2027

💰 How much do heat pump installers charge?

Indicative price ranges. A guide only — your own quote may differ.

JobTypical price
Air source heat pumps
Typical installation cost, before any grant around £12,000
Boiler Upgrade Scheme, England and Wales £7,500 off
Extra for oil or LPG homes off the gas grid (until March 2027) £1,500 off
Ground source heat pumps
Boiler Upgrade Scheme, England and Wales £7,500 off
Home Energy Scotland grant up to £7,500
Air-to-air heat pumps
Boiler Upgrade Scheme, England and Wales £2,500 off
Heat pump grants
Boiler Upgrade Scheme (England and Wales) £7,500 off
Home Energy Scotland grant + optional loan £7,500 + £7,500
VAT on installation until 31 March 2027 0%

Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.

🏛️ Grants & financial help

England and Wales: Boiler Upgrade Scheme, £7,500

The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.

Extra £1,500 for oil and LPG homes off the gas grid, until March 2027

Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.

Your MCS installer applies, not you

Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.

Scotland: Home Energy Scotland grant and loan

In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.

0% VAT on installation until 31 March 2027

HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.

Heating engineers registered in Rothes

Companies whose registered office is in Rothes, taken from the public Companies House register. A registered office is not necessarily where a firm carries out its work.

  • Grants (dufftown) Limited

    📍 Registered office: Morayshire Copperworks ., Rothes, AB38 7AD

    Incorporated 7 August 1956 · Companies House no. SC031694

  • Grampian Plumbing Services Limited

    📍 Registered office: 72.74 New Street, Rothes, AB38 7BJ

    Incorporated 3 January 2002 · Companies House no. SC226652

  • Speyside Plumbing and Building Supplies Ltd

    📍 Registered office: 84 New Street, Rothes, AB38 7BJ

    Incorporated 23 November 2015 · Companies House no. SC520878

Request your free quotes using the form above.

⚙️ Choosing the right heat pump installer in Rothes

Heat pump installation in Rothes — local building and grid context

Houses in and around Rothes include older stone and masonry properties and more recent suburban builds. Many older properties have solid walls or limited loft insulation; installers will assess insulation and may recommend cylinder or radiator changes so the heat pump can run efficiently. In rural parts near Rothes properties may be off the gas grid and use oil or LPG; that influences the design and pipework an engineer will propose.

Climate, siting and noise considerations for Moray

The local climate is cooler with exposure to wind and frequent frost inland; that affects outdoor unit siting and frost protection measures. Installers will look for a sheltered, level location with adequate airflow and access for maintenance. Noise is a common concern in town centres and near neighbours: ask installers for sound‑power figures and examples of completed installs in similar settings.

Choosing a qualified heat pump installer

Only accept quotes from installers who can show an MCS certificate for the specific system they propose; ask for that certificate number and proof of relevant public liability insurance. Check references for work on similar property types, and request a written plan covering system sizing, cylinder and radiator upgrades if required, controls and commissioning. For listed buildings or properties in conservation areas consult the council early, as additional approvals or sympathetic siting may be necessary.

Why compare several quotes and what to expect next

Different installers may recommend varying approaches — for example a direct replacement with radiator upgrades, or a more extensive fabric-first package. Comparing at least two or three detailed written quotes helps you see differences in equipment, warranties, commissioning and planned maintenance. Typical next steps are a site survey, a written quote with a proposed timeline and a pre-installation checklist covering access and any required building work.

❓ Frequently asked questions — heat pump installers in Rothes

Do I need planning permission to install a heat pump in Rothes?

Most external heat pump units fall under permitted development, but properties in conservation areas or listed buildings can have special requirements. Check with the council before works proceed and ask your installer to confirm whether planning or listed building consent is needed.

How long does a typical installation take?

Times vary with system type and property work required. A straightforward air source to cylinder replacement may take a few days, while ground source systems or installs that include radiator and cylinder upgrades can take longer. Your chosen installer should provide a clear timeline after the site survey.

What maintenance do heat pumps need in Moray's climate?

Regular maintenance includes annual servicing of the outdoor unit and checks on controls, pipework and the hot water cylinder. In colder, frost-prone conditions installers may recommend additional checks after severe weather. Agree a maintenance schedule with your installer.

Can old radiators and cylinder remain after installing a heat pump?

Sometimes existing radiators and cylinder can be retained, but heat pumps typically work best with larger emitters or a thermal store. Installers should assess whether radiator upsizing or a new cylinder is needed and include this in their written proposal.

What should I ask an installer during the site survey?

Ask for the MCS certificate number for the proposed system, examples of local installations, a breakdown of the suggested works (including any radiator or cylinder changes), proposed outdoor unit location with noise data, commissioning procedures and recommended maintenance.

📍 Heat pump installers near Rothes

Get your quotes from heat pump installers in Rothes

Free, quick and with no obligation. Fill in the form and local firms will get back to you.

Get my free quotes

© 2026 Heat Pump Sorted — Compare heat pump installation quotes

Partner sites

Scroll to Top