Heat pump installers in Mold free & no obligation
Compare several free, no-obligation quotes from heat pump installers in and around Mold.
- Free and no obligation
- Quotes from installers who cover Mold
- Check what grant your installer can claim
- You choose who to hire, if anyone
Heat pump installers in Mold
Get several quotes from local heat pump installers.
Compare at your own pace — free and with no obligation for homeowners.
Get a quick quote
- Free and no obligation
- Quotes from installers who cover Mold
- Check what grant your installer can claim
- You choose who to hire, if anyone
Thank you — we have received your request!
A local firm will contact you as soon as possible about your free, no-obligation quote.
How to get your quotes
Describe your project
Fill in the form in a few clicks with the details of your job.
Receive your quotes
Local heat pump installers get in touch with their proposal.
Compare & choose
Compare prices, references and approach at your own pace.
Get the work started
You choose the firm freely — free and with no obligation.
🏠 Heat pump installers in Mold, Clwyd
Local heating engineers serving Mold can size and fit heat pumps suited to the town’s mix of housing and its wetter, windier climate. Installers handle air-source (air-to-water), ground-source and air-to-air systems, and advise on radiator and hot-water cylinder upgrades when needed.
Use the form on this page to request free quotes from installers who work in Clwyd. Ask each installer for their MCS certificate number and for a written breakdown of the proposed works before committing.
🛠️ What heat pump installers in Mold can do for you
Air source heat pumps
- Typical installation cost, before any grant
- Boiler Upgrade Scheme, England and Wales
- Extra for oil or LPG homes off the gas grid (until March 2027)
Ground source heat pumps
- Boiler Upgrade Scheme, England and Wales
- Home Energy Scotland grant
Air-to-air heat pumps
- Boiler Upgrade Scheme, England and Wales
Heat pump grants
- Boiler Upgrade Scheme (England and Wales)
- Home Energy Scotland grant + optional loan
- VAT on installation until 31 March 2027
💰 How much do heat pump installers charge?
Indicative price ranges. A guide only — your own quote may differ.
| Job | Typical price |
|---|---|
| Air source heat pumps | |
| Typical installation cost, before any grant | around £12,000 |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Extra for oil or LPG homes off the gas grid (until March 2027) | £1,500 off |
| Ground source heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Home Energy Scotland grant | up to £7,500 |
| Air-to-air heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £2,500 off |
| Heat pump grants | |
| Boiler Upgrade Scheme (England and Wales) | £7,500 off |
| Home Energy Scotland grant + optional loan | £7,500 + £7,500 |
| VAT on installation until 31 March 2027 | 0% |
Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.
🏛️ Grants & financial help
England and Wales: Boiler Upgrade Scheme, £7,500
The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.
Extra £1,500 for oil and LPG homes off the gas grid, until March 2027
Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.
Your MCS installer applies, not you
Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.
Scotland: Home Energy Scotland grant and loan
In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.
0% VAT on installation until 31 March 2027
HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.
Heating engineers registered in Mold
Companies whose registered office is in Mold, taken from the public Companies House register. A registered office is not necessarily where a firm carries out its work.
-
System Electrical Ltd
-
Calentica Ltd
-
Wirral Plumb-fix Limited
-
Thermofyl Ltd
-
A.s Plumbing & Heating (NW) Ltd
-
A.d. Plumbing & Heating (north Wales) Ltd
-
Fire Misting Ltd
-
D.R. Plumbing & Heating Ltd
-
J.a Gas Services Ltd
-
Hafod Heating Ltd
-
Above & Beyond Heating Solutions Ltd
-
Thermabove Limited
-
HVF Heating & Plumbing Ltd
-
C & D Heating and Cooling Services Ltd
-
HD Gas & Plumbing Ltd
-
LJC Renewables Ltd
-
Eco Heat NW Ltd
-
Craig Hughes Plumbing and Heating Ltd
-
RCD Plumbing & Heating Services Ltd
Request your free quotes using the form above.
⚙️ Choosing the right heat pump installer in Mold
Heat pump installation in Mold — housing and site considerations
Mold’s housing stock includes a range of older terraced and semi-detached homes as well as newer builds and rural properties. Older solid-wall or poorly insulated homes may need fabric or heating system improvements so a heat pump works efficiently. In rural parts of the area some homes are off the gas network and run on oil or LPG; installers will survey fuel arrangements and distribution pipework as part of the assessment.
Local planning, outdoor unit siting and noise
Outdoor units need careful siting to avoid excessive noise for neighbours and to withstand heavy driving rain and strong winds common in this part of Wales. If your property is listed or in a conservation area, check with the local planning authority before works begin; your installer should advise whether planning or permitted development rules apply.
Clwyd climate and maintenance
Because the area sees frequent wet weather and wind-driven rain, installers should consider elevated mounting, weatherproof bracketing and corrosion-resistant components for external units. Regular servicing is important in a damp coastal and upland climate; agree an inspection schedule with your installer to maintain performance and warranty conditions.
How to choose a heat pump installer in Mold
Compare a shortlist of installers and ask for a home survey, a full written quote and the MCS certificate number for installations replacing fossil-fuel heating. Confirm who will handle commissioning and any applications to Ofgem under the Boiler Upgrade Scheme if relevant. Before accepting a quote, check references or recent local projects and make sure the scope covers system sizing, any radiator or cylinder changes, controls and warranties.
❓ Frequently asked questions — heat pump installers in Mold
Do I need planning permission to install a heat pump in Mold?
Most domestic heat pump installations fall under permitted development, but properties that are listed or within conservation areas may need planning permission. Ask your installer to check with the local planning authority as part of the survey.
How long does a typical installation take for a domestic heat pump?
Times vary with property type: a straightforward air-source installation can often be completed in a few days, while ground-source systems or jobs requiring radiator and cylinder upgrades take longer. Your installer should provide a clear programme before work starts.
What should I ask an installer during a home survey?
Request a full heat-loss calculation, recommended system type, expected changes to radiators or hot-water stores, locations for indoor and outdoor units, details of warranties and the installer’s MCS certificate number. Ask how they will protect the property from damp and wind during works.
How often does a heat pump need servicing in this area?
Regular annual or biennial servicing is recommended, particularly in wet, coastal or upland conditions to check outdoor units, controls and condensate paths. Agree a servicing schedule with the installer to preserve efficiency and warranty terms.
Can an installer work on homes that are off the gas network in rural Clwyd?
Yes. Installers commonly work on homes currently heated by oil or LPG and will assess fuel arrangement, pipework and the suitability of replacing the existing system with a heat pump. A survey will determine whether additional heating system upgrades are needed.
📍 Heat pump installers near Mold
Get your quotes from heat pump installers in Mold
Free, quick and with no obligation. Fill in the form and local firms will get back to you.
Get my free quotes