Heat pump installers in Hillingdon free & no obligation

Compare several free, no-obligation quotes from heat pump installers in and around Hillingdon.

5 heating engineers registered locally Free & no obligation Several quotes to compare
  • Free and no obligation
  • Quotes from installers who cover Hillingdon
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

Heat pump installers in Hillingdon

Get several quotes from local heat pump installers.

Compare at your own pace — free and with no obligation for homeowners.

Get a quick quote

  • Free and no obligation
  • Quotes from installers who cover Hillingdon
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

How to get your quotes

1

Describe your project

Fill in the form in a few clicks with the details of your job.

2

Receive your quotes

Local heat pump installers get in touch with their proposal.

3

Compare & choose

Compare prices, references and approach at your own pace.

4

Get the work started

You choose the firm freely — free and with no obligation.

🏠 Heat pump installers in Hillingdon, Greater London

Looking for a heat pump installer in Hillingdon? This page explains what to expect locally for air-source, ground-source and air-to-air heat pump installations and how installers assess homes in the area.

Hillingdon’s housing is predominantly suburban; installers focus on insulation, system sizing and outdoor-unit siting to suit local streets and gardens.

🛠️ What heat pump installers in Hillingdon can do for you

Air source heat pumps

  • Typical installation cost, before any grant
  • Boiler Upgrade Scheme, England and Wales
  • Extra for oil or LPG homes off the gas grid (until March 2027)

Ground source heat pumps

  • Boiler Upgrade Scheme, England and Wales
  • Home Energy Scotland grant

Air-to-air heat pumps

  • Boiler Upgrade Scheme, England and Wales

Heat pump grants

  • Boiler Upgrade Scheme (England and Wales)
  • Home Energy Scotland grant + optional loan
  • VAT on installation until 31 March 2027

💰 How much do heat pump installers charge?

Indicative price ranges. A guide only — your own quote may differ.

JobTypical price
Air source heat pumps
Typical installation cost, before any grant around £12,000
Boiler Upgrade Scheme, England and Wales £7,500 off
Extra for oil or LPG homes off the gas grid (until March 2027) £1,500 off
Ground source heat pumps
Boiler Upgrade Scheme, England and Wales £7,500 off
Home Energy Scotland grant up to £7,500
Air-to-air heat pumps
Boiler Upgrade Scheme, England and Wales £2,500 off
Heat pump grants
Boiler Upgrade Scheme (England and Wales) £7,500 off
Home Energy Scotland grant + optional loan £7,500 + £7,500
VAT on installation until 31 March 2027 0%

Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.

🏛️ Grants & financial help

England and Wales: Boiler Upgrade Scheme, £7,500

The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.

Extra £1,500 for oil and LPG homes off the gas grid, until March 2027

Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.

Your MCS installer applies, not you

Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.

Scotland: Home Energy Scotland grant and loan

In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.

0% VAT on installation until 31 March 2027

HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.

Heating engineers registered in Hillingdon

Companies whose registered office is in Hillingdon, taken from the public Companies House register. A registered office is not necessarily where a firm carries out its work.

  • Roy Thomson Limited

    📍 Registered office: 74 Park View Road, Uxbridge, UB8 3LL

    Incorporated 8 July 2003 · Companies House no. 04825578

  • PGK Plumbing Limited

    📍 Registered office: 39 Pear Tree Avenue, Yiewsley, UB7 8DQ

    Incorporated 4 September 2007 · Companies House no. 06360850

  • Control Heating Limited

    📍 Registered office: 12 The Larches, UB10 0DJ

    Incorporated 25 October 2017 · Companies House no. 11030143

  • Overflow Plumbing & Drainage Ltd

    📍 Registered office: 151 Collingwood Road, UB8 3EW

    Incorporated 27 January 2020 · Companies House no. 12427151

  • Saa Maintenance Ltd

    📍 Registered office: 2 Crescent Parade, Uxbridge Road, UB10 0LG

    Incorporated 10 June 2025 · Companies House no. 16509251

Request your free quotes using the form above.

⚙️ Choosing the right heat pump installer in Hillingdon

Heat pump installation in Hillingdon: housing and practical constraints

Hillingdon is made up mainly of suburban family houses, terraces and some low-rise flats. Installers will check your property’s fabric and existing heating system: insufficient insulation or small radiators might need upgrading before a heat pump can deliver comfortable temperatures. Many properties have hot water cylinders; where present, these are usually retained but may need a higher-capacity or better-insulated cylinder to match a heat pump’s lower flow temperatures.

If your home is a listed building or inside a conservation area, speak to Hillingdon Council about permitted development and any required consents before work begins. Where gas is available, an installer will confirm whether your property is currently served by the gas grid and discuss replacement of a boiler with a heat pump.

Site selection, noise and the local climate

Air-source outdoor units need a stable, well-ventilated location clear of heavy shrubbery and away from neighbours’ windows where possible. In Hillingdon’s mild, wet maritime climate, installers consider rainfall and prevailing winds when siting units to reduce noise and optimise airflow. Sound levels are an important local consideration — ask your installer for predicted noise levels at your boundary and how they will reduce vibration and airborne noise.

Choosing an installer in Greater London

Choose heating engineers with specific heat pump experience for suburban properties. Ask for the MCS certificate number and evidence of previous installations; do not assume MCS certification without checking. A competent installer will carry out a heat-loss calculation, propose suitable radiators or underfloor heating where needed, and provide a written brief showing system type, outdoor-unit location, required pipework changes and commissioning tests.

Practical timing and aftercare in Hillingdon

Typical installation timelines vary with property type and any required upgrades (insulation, cylinder or radiator work). A good installer will outline the schedule from survey to commissioning and include a commissioning report and operation manual. Regular servicing is recommended to keep the system efficient; ask about routine checks, remote monitoring options and response times for callouts in the Hillingdon area.

❓ Frequently asked questions — heat pump installers in Hillingdon

Do I need planning permission for a heat pump in Hillingdon?

Most external units fall under permitted development, but properties in conservation areas or listed buildings may need consent. Check with Hillingdon Council and ask your installer to confirm whether planning or listed-building consent is needed.

Will my radiators and hot water cylinder need upgrading?

Possibly. Heat pumps work best with larger radiators or low-temperature emitters such as underfloor heating. If you have a hot water cylinder, it may be reused but could require higher capacity or better insulation. Your installer should assess and recommend necessary upgrades after a heat-loss survey.

How do I check an installer is qualified?

Ask the installer for their MCS certificate number and examples of recent heat pump installations in similar properties. Request a written proposal that includes a heat-loss calculation, system specification and commissioning tests.

What about noise for neighbours in suburban streets?

Installers model and measure expected sound levels; good siting, anti-vibration mounts and screening can reduce disturbance. Ask for predicted noise figures at your boundary and how they will mitigate vibration and airborne noise during installation.

How long does an installation typically take and what happens after?

The timescale depends on property size and required upgrades. A full process includes survey, design, installation, and commissioning. Afterhand you should receive a commissioning report, system documentation and guidance on servicing intervals and local support arrangements.

📍 Heat pump installers near Hillingdon

Get your quotes from heat pump installers in Hillingdon

Free, quick and with no obligation. Fill in the form and local firms will get back to you.

Get my free quotes

© 2026 Heat Pump Sorted — Compare heat pump installation quotes

Partner sites

Scroll to Top