Heat pump installers in Renfrewshire free & no obligation
Compare heat pump installers in Renfrewshire and request your free quotes in a few clicks.
- Free and no obligation
- Quotes from installers who cover Renfrewshire
- Check what grant your installer can claim
- You choose who to hire, if anyone
Request your quote through our platform
Our platform lists 42,621 heating engineers in 1,357 towns.
Compare local firms and get several quotes from a single request — free and with no obligation.
Get a quick quote
- Free and no obligation
- Quotes from installers who cover your area
- Check what grant your installer can claim
- You choose who to hire, if anyone
Thank you — we have received your request!
A local firm will contact you as soon as possible about your free, no-obligation quote.
How to get your quotes
Describe your project
Fill in the form in a few clicks with the details of your job.
Receive your quotes
Local heat pump installers get in touch with their proposal.
Compare & choose
Compare prices, references and approach at your own pace.
Get the work started
You choose the firm freely — free and with no obligation.
🏠 Heat pump installers in Renfrewshire
Looking for a heat pump installer in Renfrewshire? Whether you live in a suburban townhouse, a semi with an upgraded loft, or a rural property off the gas grid, installers here commonly work on air source, ground source and air‑to‑air systems tailored to local housing types.
Use the form on this page to request free quotes from local heating engineers. Ask each installer for their MCS certificate number and a written system design before committing.
🛠️ What heat pump installers can do for you
Air source heat pumps
- Typical installation cost, before any grant
- Boiler Upgrade Scheme, England and Wales
- Extra for oil or LPG homes off the gas grid (until March 2027)
Ground source heat pumps
- Boiler Upgrade Scheme, England and Wales
- Home Energy Scotland grant
Air-to-air heat pumps
- Boiler Upgrade Scheme, England and Wales
Heat pump grants
- Boiler Upgrade Scheme (England and Wales)
- Home Energy Scotland grant + optional loan
- VAT on installation until 31 March 2027
💰 How much do heat pump installers charge?
Indicative price ranges. A guide only — your own quote may differ.
| Job | Typical price |
|---|---|
| Air source heat pumps | |
| Typical installation cost, before any grant | around £12,000 |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Extra for oil or LPG homes off the gas grid (until March 2027) | £1,500 off |
| Ground source heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Home Energy Scotland grant | up to £7,500 |
| Air-to-air heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £2,500 off |
| Heat pump grants | |
| Boiler Upgrade Scheme (England and Wales) | £7,500 off |
| Home Energy Scotland grant + optional loan | £7,500 + £7,500 |
| VAT on installation until 31 March 2027 | 0% |
Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.
🏛️ Grants & financial help
England and Wales: Boiler Upgrade Scheme, £7,500
The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.
Extra £1,500 for oil and LPG homes off the gas grid, until March 2027
Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.
Your MCS installer applies, not you
Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.
Scotland: Home Energy Scotland grant and loan
In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.
0% VAT on installation until 31 March 2027
HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.
⚙️ Choosing the right heat pump installer in Renfrewshire
Heat pump installation in Renfrewshire
Homes in Renfrewshire vary from traditional solid‑wall terraces to modern detached houses; many suburban properties have improved insulation but some older stock may still need fabric upgrades to get the best from a heat pump. Installers will assess heat loss, existing distribution (radiators or underfloor heating) and hot water storage to propose the right system and likely modifications, for example larger radiators or a suitably sized hot water cylinder.
Siting, noise and planning considerations
Outdoor unit siting matters in Renfrewshire where properties can be close to neighbours or in exposed coastal locations. Installers should propose positions that minimise noise to adjacent homes and take account of prevailing winds and shelter. If your property is in a conservation area or is listed, check requirements with the local council; installers must work within permitted development rules and can advise whether a planning application is needed.
Climate and maintenance in Renfrewshire
The local climate is cool, often wet and can see freezing conditions inland, so installers commonly specify anti‑freeze loops, frost protection settings and robust condensate management. Routine servicing is important to maintain efficiency and reliability in a damp, salty or windy environment; ask about winter checks and what seasonal tasks the homeowner should expect to carry out.
How to choose a heat pump installer locally
Choose an installer who provides a full site survey, a written proposal showing expected flow temperatures and distribution changes, and who can explain installation logistics for your street and property type. Always request the installer’s MCS certificate number and check references from nearby installations where possible. Clarify responsibilities for groundworks, access for drilling (for ground source), noise mitigation and who will apply for any necessary building‑control approval.
❓ Frequently asked questions — Renfrewshire
Do I need planning permission for a heat pump in Renfrewshire?
Most external units are permitted development but properties in conservation areas or those that are listed may need planning consent or listed‑building consent. Check with the local council and ask your installer to confirm whether a formal application is required for your property.
Are heat pumps suitable for older solid‑wall houses in the area?
Solid‑wall homes can work with heat pumps but they often need improved insulation and in some cases larger emitters or a hot water cylinder to achieve comfortable temperatures. A survey and heat‑loss calculation by the installer will show what fabric improvements or system changes are advisable.
How long does a typical installation take in a Renfrewshire home?
Timescales depend on system type and property‑specific work. A simple air‑to‑air or air‑to‑water swap in an accessible suburban home will generally be quicker than a ground‑source installation or a job that requires radiator and cylinder upgrades. Ask installers for a projected programme specific to your property.
What should I ask an installer about servicing and aftercare?
Request details of included servicing, recommended service intervals, who provides emergency call‑outs, and what is covered under warranty. In wetter, colder local conditions, confirm that the installer will check frost protection, condensate routes and controls as part of routine maintenance.
📍 Heat pump installers by town in Renfrewshire
Get your quotes from heat pump installers in Renfrewshire
Free, quick and with no obligation. Fill in the form and local firms will get back to you.
Get my free quotes