Heat pump installers in Perth and Kinross free & no obligation

Compare heat pump installers in Perth and Kinross and request your free quotes in a few clicks.

8 towns covered 82 heating engineers registered Free & no obligation Several quotes to compare
  • Free and no obligation
  • Quotes from installers who cover Perth and Kinross
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

Request your quote through our platform

Our platform lists 42,621 heating engineers in 1,357 towns.

Compare local firms and get several quotes from a single request — free and with no obligation.

Get a quick quote

  • Free and no obligation
  • Quotes from installers who cover your area
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

How to get your quotes

1

Describe your project

Fill in the form in a few clicks with the details of your job.

2

Receive your quotes

Local heat pump installers get in touch with their proposal.

3

Compare & choose

Compare prices, references and approach at your own pace.

4

Get the work started

You choose the firm freely — free and with no obligation.

🏠 Heat pump installers in Perth and Kinross

Looking for a heat pump installer in Perth and Kinross? This page helps homeowners understand local issues for air source, ground source and air‑to‑air heat pump installation and how to work with heating engineers in the area.

Use the form on this page to request free quotes from local installers who can assess your property and propose suitable systems for the local climate and building type.

🛠️ What heat pump installers can do for you

Air source heat pumps

  • Typical installation cost, before any grant
  • Boiler Upgrade Scheme, England and Wales
  • Extra for oil or LPG homes off the gas grid (until March 2027)

Ground source heat pumps

  • Boiler Upgrade Scheme, England and Wales
  • Home Energy Scotland grant

Air-to-air heat pumps

  • Boiler Upgrade Scheme, England and Wales

Heat pump grants

  • Boiler Upgrade Scheme (England and Wales)
  • Home Energy Scotland grant + optional loan
  • VAT on installation until 31 March 2027

💰 How much do heat pump installers charge?

Indicative price ranges. A guide only — your own quote may differ.

JobTypical price
Air source heat pumps
Typical installation cost, before any grant around £12,000
Boiler Upgrade Scheme, England and Wales £7,500 off
Extra for oil or LPG homes off the gas grid (until March 2027) £1,500 off
Ground source heat pumps
Boiler Upgrade Scheme, England and Wales £7,500 off
Home Energy Scotland grant up to £7,500
Air-to-air heat pumps
Boiler Upgrade Scheme, England and Wales £2,500 off
Heat pump grants
Boiler Upgrade Scheme (England and Wales) £7,500 off
Home Energy Scotland grant + optional loan £7,500 + £7,500
VAT on installation until 31 March 2027 0%

Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.

🏛️ Grants & financial help

England and Wales: Boiler Upgrade Scheme, £7,500

The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.

Extra £1,500 for oil and LPG homes off the gas grid, until March 2027

Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.

Your MCS installer applies, not you

Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.

Scotland: Home Energy Scotland grant and loan

In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.

0% VAT on installation until 31 March 2027

HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.

⚙️ Choosing the right heat pump installer in Perth and Kinross

Heat pump installation in Perth and Kinross: local building considerations

Perth and Kinross covers a mix of town properties and rural homes. Many rural dwellings are off the mains gas network and may currently use oil or LPG boilers; this affects system design and the need for hot water cylinder sizing. Older stone or listed buildings may have solid walls and lower insulation levels, while modern suburban homes often have better fabric performance. An installer should survey wall construction, insulation and existing radiators or underfloor heating to recommend modifications such as larger radiators or a suitably sized hot water cylinder.

Siting, noise and planning constraints

Outdoor unit siting is important in Perth and Kinross because exposed sites can face strong winds and high rainfall. Installers should recommend sheltered locations, secure mountings and vibration isolation to reduce noise transmission. If your property lies in a conservation area or is a listed building, check with the local council about permitted development requirements before work begins; installers familiar with the area can advise whether planning consent or listed building consent may be needed.

Local climate, performance and maintenance

The local climate is generally cooler and can be windy, with inland areas prone to frost and occasional snow. Installers will size systems with local heating demand in mind and advise on frost protection, defrost cycles and how ground conditions affect ground source options. Regular maintenance is important: ask your installer for a maintenance schedule covering checks on the outdoor unit, refrigerant circuit, controls and hot water cylinder performance.

Choosing a heat pump installer in Perth and Kinross

Ask installers for references from nearby jobs and for their MCS certificate number so you can verify certification. A local installer should offer a site survey, clear written proposals, and explain required work such as radiator upgrades, cylinder replacement or electrical supply changes. Compare several written quotes to check scope, timescales and warranties. To get started, request free quotes via the form on this page and arrange a home survey.

❓ Frequently asked questions — Perth and Kinross

Do I need planning permission to install a heat pump in Perth and Kinross?

Most domestic heat pump installations are permitted development, but properties in conservation areas or those that are listed may need planning or listed building consent. Check with the local council and ask your installer to advise on any required permissions before work starts.

Will a heat pump work in the Perth and Kinross climate?

Yes. Installers design systems for local conditions, taking account of cooler temperatures, frost risk and site exposure. Ground source systems and properly sized air source systems can perform well if the building fabric and heating distribution are suitable.

What should I ask a prospective installer during the survey?

Ask for an assessment of your insulation and radiator sizes, whether a cylinder or panel upgrades are needed, details of system performance, planned location for the outdoor unit and mitigation for noise and exposure. Also request their MCS certificate number and examples of recent local installations.

How long does a typical installation take for a domestic property?

Timescales vary with system type and retrofit complexity. A straightforward air source replacement can be completed in a few days, while ground works for a ground source system or extensive radiator upgrades will take longer. Your installer should provide an estimated schedule after the site survey.

What ongoing maintenance does a heat pump require in this area?

Routine maintenance includes annual or biennial checks on refrigerant levels and controls, outdoor unit condition and condensate/frost management. Also maintain any hot water cylinder and heating controls. Ask your installer for a recommended maintenance plan tailored to local conditions.

📍 Heat pump installers by town in Perth and Kinross

Get your quotes from heat pump installers in Perth and Kinross

Free, quick and with no obligation. Fill in the form and local firms will get back to you.

Get my free quotes

© 2026 Heat Pump Sorted — Compare heat pump installation quotes

Partner sites

Scroll to Top