Heat pump installers in City of Edinburgh free & no obligation

Compare heat pump installers in City of Edinburgh and request your free quotes in a few clicks.

4 towns covered 209 heating engineers registered Free & no obligation Several quotes to compare
  • Free and no obligation
  • Quotes from installers who cover City of Edinburgh
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

Request your quote through our platform

Our platform lists 42,621 heating engineers in 1,357 towns.

Compare local firms and get several quotes from a single request — free and with no obligation.

Get a quick quote

  • Free and no obligation
  • Quotes from installers who cover your area
  • Check what grant your installer can claim
  • You choose who to hire, if anyone

How to get your quotes

1

Describe your project

Fill in the form in a few clicks with the details of your job.

2

Receive your quotes

Local heat pump installers get in touch with their proposal.

3

Compare & choose

Compare prices, references and approach at your own pace.

4

Get the work started

You choose the firm freely — free and with no obligation.

🏠 Heat pump installers in City of Edinburgh

Looking for a heat pump installer in the City of Edinburgh? Whether you live in a tenement, a Victorian terrace or a suburban house, a qualified heating engineer can assess how a heat pump will work with your home.

Installers serving City of Edinburgh are familiar with local building types, conservation area constraints and the town's cooler, windy climate. Request MCS certificate numbers and compare several free quotes via the form on this page.

🛠️ What heat pump installers can do for you

Air source heat pumps

  • Typical installation cost, before any grant
  • Boiler Upgrade Scheme, England and Wales
  • Extra for oil or LPG homes off the gas grid (until March 2027)

Ground source heat pumps

  • Boiler Upgrade Scheme, England and Wales
  • Home Energy Scotland grant

Air-to-air heat pumps

  • Boiler Upgrade Scheme, England and Wales

Heat pump grants

  • Boiler Upgrade Scheme (England and Wales)
  • Home Energy Scotland grant + optional loan
  • VAT on installation until 31 March 2027

💰 How much do heat pump installers charge?

Indicative price ranges. A guide only — your own quote may differ.

JobTypical price
Air source heat pumps
Typical installation cost, before any grant around £12,000
Boiler Upgrade Scheme, England and Wales £7,500 off
Extra for oil or LPG homes off the gas grid (until March 2027) £1,500 off
Ground source heat pumps
Boiler Upgrade Scheme, England and Wales £7,500 off
Home Energy Scotland grant up to £7,500
Air-to-air heat pumps
Boiler Upgrade Scheme, England and Wales £2,500 off
Heat pump grants
Boiler Upgrade Scheme (England and Wales) £7,500 off
Home Energy Scotland grant + optional loan £7,500 + £7,500
VAT on installation until 31 March 2027 0%

Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.

🏛️ Grants & financial help

England and Wales: Boiler Upgrade Scheme, £7,500

The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.

Extra £1,500 for oil and LPG homes off the gas grid, until March 2027

Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.

Your MCS installer applies, not you

Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.

Scotland: Home Energy Scotland grant and loan

In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.

0% VAT on installation until 31 March 2027

HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.

⚙️ Choosing the right heat pump installer in City of Edinburgh

Heat pump installation in City of Edinburgh: fitting the local housing stock

Edinburgh has a mix of stone tenements, terraced houses and suburban properties with varied insulation standards. That mix affects which heat pump solution suits a home: many engineers prioritise air-to-water heat pumps for whole-house heating and hot water, but air-to-air or ground-source systems can be appropriate in certain plots.

Older properties often need radiator and hot water cylinder checks or upgrades to work efficiently with a heat pump. In conservation areas or with listed buildings, you may need to adapt installation plans to preserve external appearance — ask installers how they minimise visible changes and whether they will check planning or listed-building requirements with the council.

Climate, siting and noise considerations

Local weather around Edinburgh is generally cool and can be windy, with higher rainfall to the west and occasional inland frost or snow. Outdoor unit siting matters: installers should place external units where wind exposure is managed and where noise and vibration won’t affect neighbours or internal rooms. On exposed coastal locations, technicians will take extra care with fixings and corrosion protection.

  • Choose a sheltered, accessible location for the outdoor unit.
  • Confirm noise ratings and proposed anti-vibration mounts with the installer.
  • Discuss condensate drainage and winter protection measures.

How installers assess and work on local homes

A competent heating engineer will carry out a survey of your property, check insulation levels, the existing heating distribution (radiators or underfloor), and the hot water system. They should explain whether radiators need to be resized, whether a hot water cylinder must be fitted or upgraded, and how the heat pump will be connected to existing pipework.

Ask potential installers for their MCS certificate number and evidence of public liability insurance. If your property is in a conservation area or is listed, tell the installer at first contact so they can advise on appropriate approaches and any council requirements to check.

Why get and compare multiple quotes

Different installers may propose different system types, component brands and installation approaches for the same house. Comparing several detailed, written quotes helps you see variations in system sizing, proposed internal upgrades, warranty cover and timescales. All quotes should explain the expected performance, required maintenance and the installer’s experience with similar Edinburgh properties.

❓ Frequently asked questions — City of Edinburgh

Do I need planning permission for a heat pump in City of Edinburgh?

Many routine air-source and air-to-air installations are permitted development, but properties in conservation areas or listed buildings can face restrictions. Ask your installer to check local planning requirements and the council’s guidance for your address.

What should I ask a heat pump installer before hiring them?

Request the installer’s MCS certificate number, ask for references for similar local work, confirm insurance cover and request a detailed written quote that covers system sizing, proposed internal upgrades and maintenance obligations.

How long does a typical installation take for a domestic property?

Timelines vary with property type and the work needed. A straightforward swap-in or new air-to-air installation can be completed more quickly, while whole-house air-to-water installs that include radiator or cylinder upgrades take longer. Your installer should provide an estimated programme after the survey.

Are there special maintenance needs in Edinburgh’s climate?

Regular annual checks by a competent engineer are recommended to keep performance and efficiency high. In cooler, windier or coastal conditions installers will advise on measures such as securing outdoor units, protecting against corrosion and ensuring adequate drainage for condensate and meltwater.

Can a heat pump work in older stone tenements or Victorian houses?

Yes, but older properties often require additional attention to insulation, radiator sizing and hot water storage to get good performance. A survey will identify necessary upgrades and whether the proposed system can meet heating and hot water needs effectively.

📍 Heat pump installers by town in City of Edinburgh

Get your quotes from heat pump installers in City of Edinburgh

Free, quick and with no obligation. Fill in the form and local firms will get back to you.

Get my free quotes

© 2026 Heat Pump Sorted — Compare heat pump installation quotes

Partner sites

Scroll to Top