Heat pump installers in Brixham free & no obligation
Compare several free, no-obligation quotes from heat pump installers in and around Brixham.
- Free and no obligation
- Quotes from installers who cover Brixham
- Check what grant your installer can claim
- You choose who to hire, if anyone
Heat pump installers in Brixham
Get several quotes from local heat pump installers.
Compare at your own pace — free and with no obligation for homeowners.
Get a quick quote
- Free and no obligation
- Quotes from installers who cover Brixham
- Check what grant your installer can claim
- You choose who to hire, if anyone
Thank you — we have received your request!
A local firm will contact you as soon as possible about your free, no-obligation quote.
How to get your quotes
Describe your project
Fill in the form in a few clicks with the details of your job.
Receive your quotes
Local heat pump installers get in touch with their proposal.
Compare & choose
Compare prices, references and approach at your own pace.
Get the work started
You choose the firm freely — free and with no obligation.
🏠 Heat pump installers in Brixham, Devon
Local heating engineers in Brixham install air-source, air-to-air and ground-source heat pumps for homes throughout the town and surrounding rural area. Installers advise on siting, noise and how a heat pump suits older coastal properties.
If you live in Brixham, installers can assess whether your house is best served by replacing radiators, adding a hot water cylinder or upgrading insulation before fitting a heat pump. Request free quotes via the page form to compare local options.
🛠️ What heat pump installers in Brixham can do for you
Air source heat pumps
- Typical installation cost, before any grant
- Boiler Upgrade Scheme, England and Wales
- Extra for oil or LPG homes off the gas grid (until March 2027)
Ground source heat pumps
- Boiler Upgrade Scheme, England and Wales
- Home Energy Scotland grant
Air-to-air heat pumps
- Boiler Upgrade Scheme, England and Wales
Heat pump grants
- Boiler Upgrade Scheme (England and Wales)
- Home Energy Scotland grant + optional loan
- VAT on installation until 31 March 2027
💰 How much do heat pump installers charge?
Indicative price ranges. A guide only — your own quote may differ.
| Job | Typical price |
|---|---|
| Air source heat pumps | |
| Typical installation cost, before any grant | around £12,000 |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Extra for oil or LPG homes off the gas grid (until March 2027) | £1,500 off |
| Ground source heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £7,500 off |
| Home Energy Scotland grant | up to £7,500 |
| Air-to-air heat pumps | |
| Boiler Upgrade Scheme, England and Wales | £2,500 off |
| Heat pump grants | |
| Boiler Upgrade Scheme (England and Wales) | £7,500 off |
| Home Energy Scotland grant + optional loan | £7,500 + £7,500 |
| VAT on installation until 31 March 2027 | 0% |
Indicative price ranges from published UK sources, for guidance only: some exclude VAT. Your own quote may differ.
🏛️ Grants & financial help
England and Wales: Boiler Upgrade Scheme, £7,500
The Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump (£2,500 for an air-to-air system) when it replaces oil, gas, electric or LPG heating. You must own the property. Hybrid systems are not eligible.
Extra £1,500 for oil and LPG homes off the gas grid, until March 2027
Until March 2027, the grant rises by £1,500 for an air or ground source heat pump if your home is heated by oil or LPG and has no mains gas connection.
Your MCS installer applies, not you
Only an MCS certified installer can apply to Ofgem on your behalf. The grant is deducted from your quote and invoice, and the heat pump must be installed and commissioned within 120 days of the application.
Scotland: Home Energy Scotland grant and loan
In Scotland, homeowners can get a grant of up to £7,500 plus an optional interest-free loan of £7,500 for a heat pump that provides all their heating and hot water, with an extra £1,500 for rural and island homes.
0% VAT on installation until 31 March 2027
HMRC zero-rates the installation of heat pumps in homes until 31 March 2027. From 1 April 2027 the reduced rate of 5% applies.
Heating engineers registered in Brixham
Companies whose registered office is in Brixham, taken from the public Companies House register. A registered office is not necessarily where a firm carries out its work.
-
Aqua Gas Torbay Limited
-
A Golden Plumbing Service Ltd
-
Plumbsafe South West Ltd
-
Energy Efficient Plumbing & Heating Limited
-
Tom Plumb Southwest Limited
-
D. V Plumbing & Heating Ltd
-
Aldred Gas & Heating Services Limited
-
Walker Plumbing and Heating ( SW ) Ltd
-
B. Foster Plumbing & Heating Ltd
-
Ecotherm Heating & Renewables Ltd
-
Armadillo Heating Services Ltd
Request your free quotes using the form above.
⚙️ Choosing the right heat pump installer in Brixham
Heat pump installation in Brixham: housing and site considerations
Brixham’s mix of terraces, semis and period cottages plus some rural properties off the gas network affects system choice. Older homes with traditional radiators may need larger radiators or a hot water cylinder to get the best from an air-to-water heat pump. Rural properties using oil or LPG often switch from a fossil-fuel boiler to a heat pump; installers will check available outdoor space for the external unit and access for groundworks if a ground-source system is proposed.
Coastal climate, siting and noise
The local maritime climate brings mild, damp conditions and occasional strong winds. That influences corrosion protection for external units and drainage for condensate. Siting is particularly important in built-up streets and conservation areas: installers will position the external unit to minimise visual impact and reduce perceived noise for neighbours. Ask contractors to explain expected operational noise and to show typical acoustic data for the model they propose.
Planning, conservation areas and listed buildings
Parts of Brixham include conservation areas and listed buildings; external works can be subject to planning rules. Before work begins, check with the council whether planning permission or listed building consent is needed for external units, new pipework runs or groundworks. A competent installer will advise on likely constraints and on solutions that keep physical changes minimal.
How installers work locally and what to expect
Local heating engineers will carry out a heat-loss survey and propose system types (air-to-water, air-to-air, or ground-source) that suit your building fabric and heating distribution. They should provide a clear schedule covering removals, disruption, pipework routes and any upgrades to radiators or hot water cylinders. Ask for references from nearby jobs and for proof of relevant certification; installers who fit heat pumps can supply their MCS certificate number on request.
❓ Frequently asked questions — heat pump installers in Brixham
Do I need planning permission to install a heat pump in Brixham?
Not always, but restrictions can apply in conservation areas and for listed buildings. Check with the local council and ask an installer to confirm whether your property needs planning consent before work starts.
Will an outdoor unit be noisy for neighbours on narrow streets?
Modern units are quieter than older models, but siting remains important. A local installer should show acoustic specifications, propose a position that limits sound to neighbouring properties and consider anti-vibration mounts or screening where appropriate.
My house has old radiators — can a heat pump still work?
Yes, but performance may improve if radiators are upsized or if a low-temperature distribution system such as underfloor heating or a hot water cylinder is used. An installer will assess heat loss and recommend any radiator or cylinder upgrades needed for efficient operation.
How long does a typical installation take and will there be disruption?
Timescales vary with system type: air-source installations are usually quicker than ground-source systems that require groundworks. Your installer should provide a programme that explains on-site phases, expected disruption and any works to plumbing or pipe runs.
What maintenance does a heat pump need in a maritime climate?
Routine checks include cleaning outdoor coils, checking condensate drainage and inspecting controls and pipework for corrosion or insulation damage. A maintenance plan from your installer will help keep the system efficient in a damp, coastal environment.
📍 Heat pump installers near Brixham
Get your quotes from heat pump installers in Brixham
Free, quick and with no obligation. Fill in the form and local firms will get back to you.
Get my free quotes